# Genode on Intel hybrid CPUs **URL:** \ **Category:** General\ **Created:** [September 8, 2026, 9:38am UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363 "2026-09-08T09:38:22Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![9600](https://dub1.discourse-cdn.com/flex006/user_avatar/genode.discourse.group/9600/32/165_2.png) [@9600](https://genode.discourse.group/u/9600)\ **Post date:** [September 8, 2026, 9:38am UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/1 "2026-09-08T09:38:22Z")
Is Genode supported on current Intel hybrid CPUs such as Intel® Core™ i9-13900H? And if so, how would you configure which components run where, i.e. on performance vs. efficiency cores? Or perhaps it would be a matter of starting with a minimal setup which targets all and benchmarks them to find out how they are enumerated. I’m looking in particular at a Minisforum MS-01 system, and also wondering if its Intel X710, I226-LM and I226-V NICs would be supported. ---
**Author:** ![alex-ab](https://dub1.discourse-cdn.com/flex006/user_avatar/genode.discourse.group/alex-ab/32/10_2.png) [@alex-ab](https://genode.discourse.group/u/alex-ab)\ **Post date:** [September 8, 2026, 12:20pm UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/2 "2026-09-08T12:20:10Z")
The generation of CPU is supported, yes. Regarding CPU configuration and detection check out [Genode - Release notes for the Genode OS Framework 23.02](https://genode.org/documentation/release-notes/23.02#Intel_P_E_cores) and [Genode - Release notes for the Genode OS Framework 13.08](https://genode.org/documentation/release-notes/13.08#Management_of_CPU_affinities) for details or read the chapter in the Genode foundation book. On Sculpt OS you get also an interactive menu, e.g. [Genode - Sculpt Operating System 26.04](https://genode.org/documentation/articles/sculpt-26-04#sculpt_26_04_affinity), for configuration. ---
**Author:** ![chelmuth](https://dub1.discourse-cdn.com/flex006/user_avatar/genode.discourse.group/chelmuth/32/1_2.png) [@chelmuth](https://genode.discourse.group/u/chelmuth)\ **Post date:** [September 8, 2026, 1:39pm UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/3 "2026-09-08T13:39:42Z")
> [@9600](#): > > I’m looking in particular at a Minisforum MS-01 system, and also wondering if its Intel X710, I226-LM and I226-V NICs would be supported. Those devices are currently not supported by our Linux-based NIC driver, which addresses Intel 1GB adapters like i219-LM mostly (intel/e1000 and intel/e1000e drivers). I226 requires intel/igc and X710 intel/i40e to added to the port. ---
**Author:** ![9600](https://dub1.discourse-cdn.com/flex006/user_avatar/genode.discourse.group/9600/32/165_2.png) [@9600](https://genode.discourse.group/u/9600)\ **Post date:** [September 8, 2026, 2:01pm UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/4 "2026-09-08T14:01:48Z")
@alex-ab Thanks for the links, appreciated. > On Sculpt OS you get also an interactive menu. My use case is running the Hercules mainframe emulator on top of NOVA. @chelmuth Thanks for the clarification. Are there any plans to support such adapters and is it non-trivial to add support for new ones? I guess I could start out with USB attached NICs. ---
**Author:** ![chelmuth](https://dub1.discourse-cdn.com/flex006/user_avatar/genode.discourse.group/chelmuth/32/1_2.png) [@chelmuth](https://genode.discourse.group/u/chelmuth)\ **Post date:** [September 9, 2026, 4:53am UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/5 "2026-09-09T04:53:24Z")
> [@9600](#): > > Thanks for the clarification. Are there any plans to support such adapters and is it non-trivial to add support for new ones? I guess I could start out with USB attached NICs. Currently, we do not plan to enable more devices. I could imagine that igc could be enabled with medium effort but experience tells their could be surprises. So, falling back to USB NICs is a good start. ---
**Author:** ![9600](https://dub1.discourse-cdn.com/flex006/user_avatar/genode.discourse.group/9600/32/165_2.png) [@9600](https://genode.discourse.group/u/9600)\ **Post date:** [September 9, 2026, 11:33am UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/6 "2026-09-09T11:33:56Z")
Good to know and that’s a shame. I was hoping to take advantage of their IEEE 1588 PTP support. I doubt there will be any USB NICs with this due to latency/jitter. ---
**Author:** ![tickzip](https://avatars.discourse-cdn.com/v4/letter/t/848f3c/32.png) [@tickzip](https://genode.discourse.group/u/tickzip)\ **Post date:** [September 9, 2026, 12:09pm UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/7 "2026-09-09T12:09:12Z")
> [@9600](#): > > I doubt there will be any USB NICs with this due to latency/jitter. What about PCIe NICs? ---
**Author:** ![9600](https://dub1.discourse-cdn.com/flex006/user_avatar/genode.discourse.group/9600/32/165_2.png) [@9600](https://genode.discourse.group/u/9600)\ **Post date:** [September 12, 2026, 2:33pm UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/8 "2026-09-12T14:33:29Z")
> [@tickzip](#): > > What about PCIe NICs? SFF PCs only tend to have one slot and I’d like to use this with something else. ---
**Author:** ![tickzip](https://avatars.discourse-cdn.com/v4/letter/t/848f3c/32.png) [@tickzip](https://genode.discourse.group/u/tickzip)\ **Post date:** [September 12, 2026, 3:32pm UTC](https://genode.discourse.group/t/genode-on-intel-hybrid-cpus/363/9 "2026-09-12T15:32:25Z")
> [@9600](#): > > SFF PCs only tend to have one slot and I’d like to use this with something else. I am not sure if the dimensions/casing on the MS-01 will allow this, but you could use an M.2 to PCIe/Oculink adapter.